GlacialTech, a renowned manufacturer of computer, today an interesting structure of a CPU cooler presented. Instead of large areas the emphasis on large air flow with two fans, which are to keep the computational servant to temperature. As the construction fails in the details, we will now show.
The idea is simple: you have to dissipate heat fast enough from the CPU, then the cooling surfaces turn out not too large. We have implemented it pays nickel with a copper plate, which has six 6mm heatpipes heat to the very small aluminum fins. To ensure the necessary air flow for now, we should installed on top of a very large and slow-running 140mm fan which only fanned the air ". For the main flow of the well bottom, only 92mm wide fan is responsible. That this concept works, the admission for all current base shows up to maximum TDP of 130 watts - so virtually without restriction. Unfortunately, over the volume yet known, the two noisy pro rotate but with a maximum of 1400 revolutions per minute.
The idea is simple: you have to dissipate heat fast enough from the CPU, then the cooling surfaces turn out not too large. We have implemented it pays nickel with a copper plate, which has six 6mm heatpipes heat to the very small aluminum fins. To ensure the necessary air flow for now, we should installed on top of a very large and slow-running 140mm fan which only fanned the air ". For the main flow of the well bottom, only 92mm wide fan is responsible. That this concept works, the admission for all current base shows up to maximum TDP of 130 watts - so virtually without restriction. Unfortunately, over the volume yet known, the two noisy pro rotate but with a maximum of 1400 revolutions per minute.